Inkling 2 Small

Posted by Philpax 16 hours ago

Comments

Comment by segmondy 2 hours ago

Ohmygoodness, the results look amazing. I felt so sad for them when their first weights dropped, a lot of other great models came out around then and they didn't get the chance to shine even if for a week or 2. But looking at these results, this is really good stuff and a decent alternative to DSv4.1-F1017. Also the best and most detailed comparison I have seen from a lab across models.

Comment by Jackobrien 16 hours ago

The best open models today have been “good enough” to do most knowledge work for a few months. This might be the first US one good enough too. That’s a big deal.

Open weight US based Opus 5.5 within 12 months.

Comment by kadoban 15 hours ago

> Open weight US based Opus 5.5 within 12 months.

Seems unlikely. Maybe open weight at all near there? That'd be great.

Comment by wolttam 15 hours ago

People say this about the frontier every time, and the open models catch up in a matter of months every time.

Comment by kadoban 14 hours ago

The open models catch up, the _US_ open models catch up much more slowly. Different incentives and cultures.

Comment by p-e-w 15 hours ago

Why does that seem unlikely? The difference between frontier and open weights has been much less than 12 months for a while now.

Comment by satvikpendem 15 hours ago

US open weights are much worse, way more than 12 months apart compared to frontier.

Comment by 13 hours ago

Comment by kadoban 14 hours ago

> Why does that seem unlikely? The difference between frontier and open weights has been much less than 12 months for a while now.

Frontier and open weights? Yes.

Frontier and _US_ open weights? No.

I'd expect a US open weights provider to suddenly get bought or go non-open if they get near Opus 5.5 anyway.

Comment by nghiemphucminh7 14 hours ago

[flagged]

Comment by npc99 14 hours ago

Inception Mercury 3 and Particle-1's model are also good.

(I am assuming Inception is an American company, not sure TBH)

Comment by ray__ 14 hours ago

Agree, Mercury 3 is one of my favorite models right now...the speed is such a quality of life improvement.

Comment by Bluestein 6 hours ago

May I add Poolside (Laguna S) to this? Used them extensively during their free trial (sadly now apparently over).-

Comment by johnshahbazian 11 hours ago

For my own purposes, I found Mercury Decide to be excellent. Better than Jev at what I threw at it. Inception did a really great job with it.

Comment by flipbrad 10 hours ago

Thanks for your review, 15 day old HN account that likes praising Mercury services.

Comment by martincsweiss 14 hours ago

Really? I'm surprised. What do you use it for?

My read on Diffusion LLMs has been that it's cool tech, but only useful for things like like code autocomplete or editing a block of text.

They don't beat autoregressive models on quality per compute, assuming you are serving lots of users and can batch requests.

Comment by npc99 2 hours ago

I just use it for normal coding stuff.

It's not as good as the current frontier, to be fair. I don't use it to help me think through architecture, for example. But I have found to work well for at least like half of coding tasks once architecture and patterns are in place. Its advantage is that it's very very fast.

Comment by serf 13 hours ago

MoA schemes that use proposers/task-separation/supervisory roles can still benefit from very fast diffusion models like mercury, the overall speed doesn't have to be bottle-necked by the slowest model -- that depends on the arrangement it's deployed in.

but to your point , yeah diffusion models can be kind of brain dead without proper coaxing.

my ideal arrangement is a smarter/bigger model supervising lots of proposals from diffusion models. The diffusion models spit out a big proposal each, the bigger model can vet something as minor as the headline or filename for each proposal, time still ends up being saved.

Comment by freakynit 12 hours ago

Sorry to put it bluntly, but, Mercury is sh*t in comparison. And I have genuinely tried a few times to use it since the speed is so good. But nop.. it just isn't there.

Comment by josh-wrale 13 hours ago

Muse Glimmer is pretty good.

Comment by BOOSTERHIDROGEN 11 hours ago

Could you give some examples what makes them good, thanks

Comment by agentdev001 13 hours ago

I give it 2.

Comment by walrus01 12 hours ago

Things have been remarkably "not terrible" since approximately the release of Laguna S 2.1 a while back in early summer 2026, which is now outdated within the past 6 month time frame by other, better non CN open weight models.

I'm not saying that any of them are to the level as a deepseek v4.1 flash 1017 or similar but they're catching up. The most recent huge mistral release is also grounds for an optimistic view.

Comment by gigatexal 12 hours ago

That’d be the inflection point I’m waiting for!

Comment by epsteingpt 15 hours ago

It's a nice, domestic open weight model.

Without hundreds of millions in 9 days a small team is producing a model that can beat DeepSeek 4.1 and a platform to tune it.

Optimistic for the future.

Comment by alexandra_au 9 hours ago

It doesn't beat DS v4.1, and they have so much more compute capacity than any Chinese company, yet still cannot even beat MiniMax M3.1 Flash (220B) despite having 2.7x more parameters (596B).

Comment by wren6991 4 hours ago

> yet still cannot even beat MiniMax M3.1 Flash (220B) despite having 2.7x more parameters

MiniMax M3.1 Flash is 428B total parameters, so the size ratio is more like 1.4x. Model card here: https://huggingface.co/MiniMaxAI/MiniMax-M3.1-Flash

The number HF calculates from the safetensors metadata is often wrong (e.g. counting u8-packed 4-bit weights as half a weight each) so you need to take the number from the actual model card.

Comment by perks_12 5 hours ago

I wouldn't bet on the numbers of compute reported by Chinese labs. Those Singapore Nvidia orders had to go somewhere.

Comment by explosion-s 13 hours ago

Correctly if I’m wrong but isn’t inkling made by a very well funded startup from an ex - OpenAI exec iirc?

Comment by arcticbull 12 hours ago

Yes, Mira Murati's Thinking Machines. They are apparently trying to raise $5B at $40B, after raising $2B at $10B last year.

Comment by markasoftware 13 hours ago

Not beating dsv4.1 at all

Comment by lifeisloving 13 hours ago

If you cant beat Deepseek on price im not using it. I actually dont care about beating DS in capabilities, I dont think you need more intelligence than Deepseek for 99% of the things people work on, and I dont want LLMs to do everything, that kind of defeats the point. I just need a smart fuzzer and to offload some tedious busy work.

So why should I pay for 3-20x more for a few small percentage points in preformance. (I would prefer DS did some things better, but largely I can force my desired behavior), but I could only have access to Deepseek 4.1 and still beat almost everyone using opus/fable/astra on a productivity basis, I need automation tools not "do my entire job so Im worthless tools", and DS has already more than gotten there for me.

Comment by a3w 3 hours ago

domestic -> people live in antarctica. No domestic LLM for them.

No domestic good LLM for me, either.

Comment by ares623 9 hours ago

Are they distilling from the big labs or Chinese labs at all? In that case isn't it $1 trillion frontier CAPEX + Inkling's costs for the total costs.

"I bought this house with my own savings plus a small million dollar loan from mum and dad."

Comment by moonu 3 hours ago

In their last technical report (for the original Inkling model), they mentioned 'To bootstrap post-training, we ran an initial SFT on synthetic data generated by open-weights models including Kimi K2.5. The bootstrap accounts for a small fraction of compute, with the majority being employed for large-scale RL on synthetic and human-created environments.' and in their most recent one they said 'The H3 and H4 mixtures consisted mostly of trajectories sampled from earlier models including Kimi K3 and our own models, filtered for correctness and alignment.' So it does seem like traces from larger models do contribute. I think Microsoft is one of the few companies that has actively made an effort to avoid distillation with their MAI series.

Comment by swid 9 hours ago

Everyone is building on everything that comes before.

Houses are not built from scratch either. The know-how, power, water, roads, materials…

Comment by ares623 9 hours ago

Yes, and the sum total of those costs (that makes _some_ economic sense) end up on the total house price.

Is the same true for distillation?

Comment by anon373839 4 hours ago

If you’re going to do the cost math that way, be prepared to put a price on ~the total sum of all works created by humanity, which the frontier labs appropriated for their models.

Comment by itkovian_ 13 hours ago

The most important thing here is training was entirely nvfp4 - this is best model by far that has ever been trained in that precision and explains why they were able to do it so fast

Comment by boredatoms 10 hours ago

Oh nice they’ll run well on sparks

edit: nm I see its a bit big

Comment by a11r 15 hours ago

Very refreshing to see benchmarks where the reporting team is not the clear winner. They are claiming to be better than GLM 5.3 flash, which is impressive if it holds up outside of benchmarks.

Comment by tcdent 16 hours ago

Is it SOTA yet? No. Are the domestic open weights labs demonstrating incredible velocity? Undeniably.

Comment by segmondy 2 hours ago

Would this have been SOTA at the beginning of the year? Yes. Where you happy with SOTA in january? Why can't we then be happy with this? I mean, perhaps Inkling 3 or 4 Small will crush Opus 5.5 and then we will ask if it matters since it's not Opus 7... Everyone can't be SOTA. With these open weight models, I simply ask. Is it useable, is it useful? Can I get very useful work out of it at a reasonable cost to other open models and cloud models? If the answer is yes, then it's a go.

Comment by bashtoni 16 hours ago

Distillation is the tide that lifts all boats

Comment by epsteingpt 15 hours ago

Imagine if Mira Murati and John Schulman actually know what they're doing?

Comment by tcdent 15 hours ago

Given the time to market and the date in which these labs were founded, I find it far more likely that the lag was representative of them establishing proper internal (RL etc) tooling.

Comment by bensyverson 12 hours ago

Seems to be pretty close to SOTA on design. I’m excited to try it out with my agentic design system.

Comment by syntaxing 15 hours ago

I can’t seem to find the cost? The craziness of deepseek flash 1017 is how ridiculously cheap it is for how capable it is.

Comment by Bolwin 15 hours ago

AA lists it as $0.30/0.03/1 and cost per task is $1.18, about double that of deepseek

Comment by syntaxing 15 hours ago

It’s about 2-3X more expensive so about the same token efficiency as 1017. I can see this being a good option for the US.

Comment by kadoban 15 hours ago

Wow, that's pretty good.

Comment by cauliflower99 7 hours ago

As someone who knows nothing about wine except I like drinking it - that wine test is fascinating.

Comment by alexandra_au 13 hours ago

Damn their last "Inkling Small" model was only 266B and now this is more than double.

Comment by 65a 2 hours ago

This isn't small at all, for most budgets outside of enterprise, and if you have an enterprise budget why not throw a few more machines in and run a larger and better model?

Comment by ddxv 16 hours ago

This is amazing! Can't wait to trying this out. Also, crazy that I found this on LinkedIn with more upvotes and discussion than the HN thread has.

Comment by Neywiny 14 hours ago

I feel like this is a dumb question, but why are we spending any effort on wine comparisons? Is there a way to get rid of experts on these to just be ones for code?

Comment by kccqzy 14 hours ago

What if your coding project is related to wine? So you would want facts about wine to be inside the weights, not through web search.

Comment by Neywiny 14 hours ago

If it was about wine, why would I want one with a training data cutoff? I'd much rather have one that can query a database about wine

Comment by randomblock1 14 hours ago

It's not like they're training on that. That's just a good showcase of how the model is good at generalizing & understanding (not benchmaxxed). You might want something similar to these experts for tasks like detecting anomalies or discoloration or whatever.

Comment by Neywiny 13 hours ago

Source they didn't train on it?

Comment by XenophileJKO 12 hours ago

Just looking through the benchmarks, the model seems to be very high on visual/spatial capabilities. So I assumed they just tried some hard tasks on it and was surprised by wine identification and thought it was surprising that it could identify wines.

Comment by zild3d 5 hours ago

you want your coding models to have good taste, so we have fed them a vast dataset of sommelier wine gradings.

we've also contracted hundreds of local record store guys with deeply knowledgeable music taste spanning post-punk, classic jazz, early hip-hop, and deep-cut experimental vinyl. This has resulted in the model returning judgmental responses up to 23% more often which we are working on addressing.

Comment by maelito 9 hours ago

Looks better than mistral 4 on all benchmarks ?

Comment by segmondy 2 hours ago

Mistral 4 IMHO is not that good. I have run the full NVFP4 weight, and I couldn't stomach it after 3 days of driving it. I went back to other models, I have more fun bouncing between DeepSeek, GLM, MiMo, Hy4, MiniMax & Qwen. If Thinkingmachine's self reported benchmark is true, I'm certain it's going to get into heavy rotation of my models.

Comment by cvwright 1 hour ago

I played around with Le Chonk on a toy project and it was ... very okay. Felt like a throwback to the Opus 4 era. It committed when I had told it not to, and it spent a lot of time arguing with itself going in circles.

I feel like the gap between Opus and Grok is about the same as the gap between Grok and Mistral. I didn't revert its code or anything, but I also didn't refill the initial OpenRouter budget when it ran out.

At the same time, I guess Opus 4 level is pretty good for a Western open weights model. 2027 is going to be amazing.

Comment by ygouzerh 10 hours ago

Interesting, I sent the same wine testing example to Claude Opus 5.5 medium, and it failed, where Inkling 2 Small succeed.

Comment by Tade0 1 hour ago

> We even tested Inkling 2 Small against some of our researchers in a wine tasting event. It outperformed them using vision alone, correctly identifying three wines from a single picture in 19 out of 20 trials.

So the legendary skill of Charles Duchemin is now widely available? What a time to be alive.

Comment by lostmsu 15 hours ago

> Small: 594 billion parameters

cries in GPU racks

Comment by colingauvin 15 hours ago

You could probably run a Q2-Q3 with 2x DGX Sparks. So...$12k at today's prices. Plenty of folks are running DS 4.1 Flash with Strata and some GPU + bulk in system memory. Maybe more like $3k-$4k? But speeds come down quite a bit.

Comment by lupodevelop 7 hours ago

[flagged]

Comment by joshspankit 2 hours ago

Q2. Woof.

Comment by colingauvin 35 minutes ago

It actually benchmarks quite well. Honestly not practically worse than the Q4 native weights.

Comment by rocha_lucas 3 hours ago

I couldn't pay attention on the content, i was playing with dots

Comment by barrenko 7 hours ago

They should buy the pleias team and just mog everyone.

Comment by Kuyawa 1 hour ago

"Sorry, you have been blocked"

*Shrugs*

DeepSeek would never block me

Comment by AnthonyR 8 hours ago

I like the presentation on their website! Super well done

Comment by singpolyma3 15 hours ago

So basically comparable to DS4.1? But why bother to make something we already have?

Comment by segmondy 2 hours ago

Even when models score about the same, if you play with them long enough, you will discover capabilities that are unique to them. I have never see any 2 models that are comparable across every single area.

Comment by nullbio 9 hours ago

I would hope that the American models aren't benchmaxxed to hell like all of the Chinese ones are.

Comment by wasfgwp 8 hours ago

Why?

Comment by multisport 14 hours ago

Because its american.

Comment by singpolyma3 14 hours ago

lol

Comment by reasonableklout 14 hours ago

Sovereign open source AI is a real thing, lots of companies want to own their own intelligence but also don't trust the models coming out of China.

Comment by singpolyma3 13 hours ago

Why would you trust anything coming out of USA?

Comment by ukblewis 8 hours ago

Why would you trust China on anything?

https://www.hirundo.io/blog/glm-revolut

Comment by estearum 13 hours ago

The vast majority of users on this website wouldn't be trusting something coming out of the USA, they'd be trusting something in the USA.

Comment by nozzlegear 12 hours ago

Do you mean to ask why non-American companies would trust anything coming out of the USA? Because American companies tend to have a lot of trust for other American companies.

Comment by jazzyjackson 15 hours ago

I don’t like it. Poor form to squat on an old companies name like that, one which has a rich legacy in AI. I know the trademark was cancelled so all I can say is I don’t like it.

Comment by alfiedotwtf 8 hours ago

Looks awesome, but dang a bit too big for my machine.

… I can’t wait for custom resizable models!

FWIW: like the Sims where you have certain levels where you move one up and others non-linearly go down e.g. Speed, Intelligence, Conciseness, determinism, trainability